FAQs

What projects can the FLEXiO 590 be used for?

The FLEXiO 590 is an all-purpose multi-sprayer that utilizes X-boost HVLP technology Features the iSpray front end which delivers a slightly stippled finish on walls Includes the Detail front end for fine finishes which is great for cabinets and doors

What does HVLP mean?

HVLP stands for High Volume Low Pressure. HVLP sprayers use high volumes of air at low pressures which atomizes coatings so that they can be sprayed.

What should I use to clean my sprayer?

Always check the back of the material container for an appropriate cleaning solution.
Water or latex materials will generally clean up with warm soapy water.
Oil based materials will typically clean up with mineral spirits

Do I have to thin the material?

This will depend on which front end you use.
The iSpray font end – This front end will not require thinning.
The Detail front end – This front end may require thinning.

Can I spray lacquer with my sprayer?

No, a solvent based lacquer can’t be used; some water based lacquers are acceptable.

Where can I get parts?

Your local service center may have the parts you need. If you require further assistance you can contact Wagner directly at 1-800-328-8251.

Keys to Success

There are a few things that can heavily impact the quality of a project.

1. Water is a great way to test out your machine, and it allows you to get used to how it functions.
2. Maintain a consistent distance and don’t bend your wrist.
3. Overlap your pattern by one third to one half for best coverage.

What can the HT3500 heat gun be used for?

There are plenty of uses for this heat gun, including but not limited to:

• Stripping paint, caulking, and adhesives
• Loosening rusted or thread-locked nuts, bolts, and fittings
• Bending plastic piping
• Shrinking plastic films or shrink tubing.

What kind of power does the HT3500 have?

The gun produces 1500 Watts and 5100 BTUs of power.

My gun doesn't heat up or doesn't blow air, what can I do?

If the heat gun has stopped working, please call Wagner at 1-800-328-8251.

What temperatures does the gun operate at?

The HT3500 operates at a range of temperatures from 250 to 1350 degrees Fahrenheit via the electronic touch pad.

Where can I get parts?

Your local Service center may have the parts you need. If you require further assistance you can contact Wagner directly at 1-800-328-8251.

Keys to Success

1. Select the correct temperature setting for your project.
2. Keep the gun moving; doesn’t hold it in one place to prevent damaging the surface.
3. Test the heat gun in an inconspicuous area to ensure that your heat setting and technique will not damage the surface.

What can the 915 Steamer be used for?

There are plenty of uses for this steamer, including but not limited to:

• Stripping Wallpaper
• Cleaning grills or stovetops
• Cleaning tile and bathroom fixtures
• Cleaning floor surfaces

Where can I get parts?

Your local service center may have the parts you need. If you require further assistance you can contact Wagner directly at 1-800-328-8251.

What temperatures does the 915 steamer operate at?

The 915 Steamer operates at approximately 100°c or 212°f

My Steamer doesn't heat up or doesn't blow air, what can I do?

If the Steamer has stopped working, please call Wagner at 1-800-328-8251.

Where can I get parts?

Your local Service center may have the parts you need. If you require further assistance you can contact Wagner directly at 1-800-328-8251.

Keys to Success

1. Do not let the Steamer run dry this can damage the thermal safety switch.
2. Be sure to demineralize the heating element with vinegar and water