MotoCoat Complete Sprayer

$ 199.99
Designed for DIY auto enthusiasts and installers, Wagner MotoCoat sprayers will safely apply low flash-point coatings like protective materials and customizing coatings.

It is a self-contained sprayer with a spark-contained motor, long reaching hose and two nozzle attachments.

The MotoCoat Complete sprayer applies everything from heavy truck bed coatings and undercoating to light materials such as rubberized peelable coatings and auto finishing paints.

Videos

Motocoat Complete Sprayer Overview
Motocoat Complete Sprayer Overview Video
Motocare Complete Sprayer Painting
Motocare Complete Sprayer Painting Video

ESPECIFICAÇÕES

  • X-Boost Turbine provides great atomization and the portable power for painting anywhere without additional equipment
  • iSpray Nozzle and cup attachment sprays protective coatings to create a thick coat with a texture finish
  • Detailed Finish Nozzle and cup sprays thin materials with even coverage and smooth finish
  • 39' of High-Flex Hose allows for complete maneuverability around a vehicle
  • Adjustable material flow gives the user control to match the project application
Download Manual

Parts and Accessories

P/N 0529013
Detail Finish Front End

Detail Finish Front End

$39.99

Buy Now
P/N 0529014
iSpray Front End

iSpray Front End

$39.99

Buy Now
P/N 0414353
Control Finish Nozzle Gasket

Control Finish Nozzle Gasket

$4.99

Buy Now
P/N 0529224
Air Cap for iSpray Front End (Black Needle)

Air Cap for iSpray Front End (Black Needle)

$7.99

Buy Now
P/N 0529225
Spray Jet Kit for iSpray Front End

Spray Jet Kit for iSpray Front End

$8.99

Buy Now
P/N 2343747
Nozzle for iSpray Front End (Black Needle)

Nozzle for iSpray Front End (Black Needle)

$4.99

Buy Now
P/N 0529005
Check Valve Kit for iSpray, Control Finish and Detail Front Ends

Check Valve Kit for iSpray, Control Finish and Detail Front Ends

$5.99

Buy Now
P/N 0417465
Nozzle Gasket for iSpray Front End (Black Needle)

Nozzle Gasket for iSpray Front End (Black Needle)

$4.99

Buy Now
P/N 2303366
1.5 Quart Cup for iSpray Front End

1.5 Quart Cup for iSpray Front End

$9.99

Buy Now
MotoCoat Protect is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from MotoCoat unit provides great flexibility! This MotoCoat unit provides a great deal of flexibility for me to perform a wide variety of painting projects. The 39 foot standard hose lets me do automotive projects with the turbine well away from the spray zone, and then switch to a 2-story latex wall painting project without having to keep relocating the turbine. Additionally the detail spray gun comes with a much larger paint container (than other units) so I can do narrow, detail work (like 260 individual 1-½" square pickets, 7 feet long on a Garden Gazebo project I just finished) without constantly refilling the pot. So far turbine has run great - up to 3-4 hours without shutting it off. Only advice is to keep a small rag handy and regularly wipe the spray nozzle to avoid build-up.
Date published: 2017-01-21
  • y_2018, m_9, d_18, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_024964225835, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_wagnerspraytech
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 46.43ms
  • REVIEWS, PRODUCT

Are there more specs such as 4.5 CFM's at 70 psineedle sizes, Motor watts? Can you use other HVLP guns? Will this work to apply Lizardskin Insulation and to spray Duplicolor Automotive Lacquer Finish System paint?

Asked by: doin100mph
This sprayer is not rated the way a fine finish sprayer would be with PSI and CFM's and is not interchangeable with other HVLP spray guns. This sprayer should be good for spraying the Lizardskin. As for the finish paint this isn’t an automotive quality finish sprayer so it will not produce a showroom finish such as what you would generally want on a car. If you would like to give us a call at 1-800-328-8251 we will assist you with picking out a sprayer.
Answered by: Technical Support
Date published: 2018-08-31

Do you plan to release a smaller nozzle for base coat/clear coat paint? Something around 1.4mm would be perfect.

Asked by: Jeremy H
At this time, we do not have any plans for changing the nozzles on the MotoCoat. We do however, make sprayers for fine finishing. Take a look at these -http://www.rockler.com/rockler-finishing-sprayer http://www.rockler.com/earlex-spray-station-5500-with-15mm-fluid-tip-needle http://www.rockler.com/earlex-hv6003pus-hvlp-sprayport All three of these units have needles ranging from 0.8mm up to 2.5mm. For more info call us at 800-328-8251.
Answered by: Technical Support
Date published: 2018-08-22

Can I spray polyester surfacer (filler infused primer) with this system? The primer calls for a 2.0 - 2.5 size nozzle, should I use the iSpray or detail finish gun?

Asked by: Jeremy H
The iSpray nozzle is 2.5mm and the detail is 1.8mm, it should work just fine.
Answered by: Technical Support
Date published: 2018-08-15

Hi, Can Motocoat sprayer be used to apply Low VOC Eastwood 2 stage basecoat and clearcoat? If so, are there any preferred settings using the 0529013 sprayer? Thanks. Willie

Asked by: Willie 8
It should spray great! Keep power up and fluid flow down for better atomization. Use the detail finish front end on the gun and spray from 6" away. For tips about application contact us at 800-328-8251.
Answered by: Technical Support
Date published: 2018-07-26

Which will do a better job of spraying automotive clear coat mixed with fine glitter; iSpray Nozzle or Detail Finish Nozzle?

Asked by: KingCold
Use the detail finish nozzle for fine finishing. Using a grit or texture in the sprayer can prematurely wear the nozzle/needle and may require replacement earlier than expected. For tips and tricks call us at 800-328-8251.
Answered by: Technical Support
Date published: 2018-06-14

I can use an oil-based stain for a deck or house siding correct? Any thing to watch out for when doing this?

Asked by: Jonestw
Yes, oil based stain will work fine with this sprayer. Just don't use harsh solvents to clean it. Use mineral spirits and it will work well.
Answered by: Technical Support
Date published: 2018-06-13

What paints can I shoot thru this sprayer to paint a car?

Asked by: LoydT
Any water or oil based paints can be used without issue. Primers, color and sealer. For automotive top coat paints, enamel works very well with the MotoCoat. For more tips call us at 800-328-8251.
Answered by: Technical Support
Date published: 2018-05-10

Follow up question. Can I use the Wagner motocoat sprayer to spray rust bullet automotive primer on an old pickup bed? This type of primer is thick and has aluminum powder in it.

Asked by: Tdburns81
The aluminum powder may wear out the needle/nozzle prematurely, but most likely can be sprayed with adequate thinning. For more tips and tricks call us at 800-328-8251.
Answered by: Wagner
Date published: 2018-04-04
  • y_2018, m_9, d_18, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_30
  • loc_en_US, sid_024964225835, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_wagnerspraytech
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 48.07ms
  • QUESTIONS, PRODUCT