Paint-N-Roll Roller

$ 24.99
The Paint-N-Roll paint roller will make fast work of your next interior painting project.

Avoid all the back bending trips to the paint tray with the 18-ounce capacity reservoir that directly feeds the 9-inch roller.


  • Paint is supplied to the roller with a push of the plunger
  • 9" x 3/8" nap roller covers more area in less time
  • Splatter shield helps prevent unwanted paint spots on all surfaces
  • Roller connects and disconnects for easy assembly and disassembly
  • Latex- and oil-based paint compatible
Download Manual

Parts and Accessories

P/N 0514118
9 inch Roller Cap and Core Replacement Kit

9 inch Roller Cap and Core Replacement Kit


Buy Now
P/N 0514112
9 inch Roller Arm Seal Kit

9 inch Roller Arm Seal Kit


Buy Now
P/N 0271434
Duckbill Valve for Smart Rollers

Duckbill Valve for Smart Rollers


Buy Now
P/N 0155206

9" X 3/8" Roller Cover


Buy Now
P/N 0155208

9" X 3/4" Roller Cover


Buy Now
P/N 0530200

3" Roller Cover


Buy Now
Paint-N-Roll is rated 2.9 out of 5 by 21.
Rated 4 out of 5 by from Good product for small jobs. It worked better than expected. I had the same problem as most with the clip failing and the roller popping off leaking but it only happened once because unlike most I outsmarted it and used a cable tie and finished the rest of the house without issue. Good product
Date published: 2018-09-09
Rated 1 out of 5 by from Disposable I used the unit 2 times for small jobs. The 2nd time I used it the fill valve began to leak and drip. The unit worked well up to that point. I was very disappointed to only be able to use it twice, once for the ceiling in a 10x10 room and then half the walls before it began to fail.
Date published: 2018-05-21
Rated 5 out of 5 by from Great product my father-in-law has 2. my wife used and loves it.
Date published: 2017-06-12
Rated 1 out of 5 by from Great When It Works I purchased 2 Paint N Roll Plus rollers from Walmart a few weeks ago. The roller on one works fine and provides nice coverage, but the ridges that the clip sits in on the other one is likely defective. This defect causes the roller to slip out of place and paint to spray wildly when used. I have attempted to contact customer support and have had no success. I would encourage caution when purchasing this project.
Date published: 2017-05-30
Rated 1 out of 5 by from Good For A Gallon When this roller works its fantastic, however it only does that for a gallon of paint and then it drips all over the place. I thought I was doing something wrong the first time I used it, so I cleaned it up and put it away and finished with a manual roller. The following time when I tried it, it did the same thing. What a pain, it bad enough that the clean-up on this thing takes about a 1/2 hour which you can deduct from the time you save with it, but when you have to deal with the clean-up of the dripped paint all over it is definitely not worth it. It's really too bad because for larger projects it would be a real time saver.
Date published: 2017-04-24
Rated 1 out of 5 by from I'd rather use a paint tray I loved the idea of not needing to climb up and down a ladder to load my paint roller a thousand times, and I talked my husband into buying this. I thought it would save so much time and energy, HOWEVER; while I do not need to keep reloading the roller, the pad keeps popping off mid-stroke! When this happens, paint usually drips all over, and then when i pop it back into place, the paint splatters everywhere. I'm getting pretty annoyed and want to throw the thing in the trash. The "owners manual" doesn't help at all either - the only troubleshooting information it offers are things related to not cleaning the product properly...which I haven't even gotten to yet. I definitely won't suggest anyone purchase this item!
Date published: 2017-01-28
Rated 1 out of 5 by from Great concept but the clip that holds the roller on pops off I purchased this to help me efficiently paint the main living area of our home. It worked great for the first half gallon of paint but then the clip that holds the roller on weakens and roller pops off; dumping paint everywhere. The first time it happened I thought I must have bumped the clip somehow. I went on to the next wall and the head popped off FIVE times on that wall. Not a good feeling when you are up on a ladder and the head comes off and paint is running down the wall and to the floor all over your drop cloth. I finished the wall and didn't have to worry about the clean up as the whole thing went in the trash. Also, something to consider is when it is full of paint it becomes heavy if you are trying to paint in areas such as above your cabinets.
Date published: 2015-11-25
Rated 1 out of 5 by from Damaged goods Ordered on line thru Amazon, roller was damaged, thru the shipping box away, thought I wouldn't need it, Cost too much to ship back so I repaired it, was able to use it once, and only once, would not suck up the paint, clean and re-clean again. just would not suck any paint would not work again. What a waste of money, Don't think I will be doing much more shopping on line shopping either.
Date published: 2015-11-10
  • y_2018, m_11, d_13, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_21
  • loc_en_US, sid_024964158973, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_wagnerspraytech
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 248.88ms

Can I use oil based stain in this roller, or is stain too thin?

Asked by: RickyRodeo
Stain is just fine in our rollers.
Answered by: Technical Support
Date published: 2018-07-16

Where do I find a storage box or plastic storage box to save the roller and its component parts?

Asked by: two beers
We do not manufacture a storage box or case for our rollers. Since you will need something with length you may be able to use a storage container for wrapping paper. The roller arm and cover can be stored in any regular tool box or bag.
Answered by: Wagner
Date published: 2017-08-21

My roller pad keeps popping off! (I even gouged my wall because of this!) What can I do to fix it?

I will be in the middle of painting the wall and the roller pad will pop off, and paint will drip everywhere. I gouged my wall because it happened mid-stroke and I'm not very happy! Every time it happens, when I snap the pad back into place, paint splatters everywhere. This is not going as I had planned. I almost would rather just climb up and down the ladder with a normal paint tray. The users manual is completely useless, as the only troubleshooting information it provides are things associated with me not cleaning the item properly...Help!
Asked by: PollyPainter
I'm sorry about the problem you have had with the Paint-N-Roll. We have terrific technical support that is here to help. It sounds like the clip that holds it together has failed and needs replacement. Call us at 800-328-8251.
Answered by: Wagner
Date published: 2017-01-31

how do you unscrew the plunger to get to the o rings?

Ours was already assembled and it is impossible to separate .
Asked by: Soonerfan52
If the unit is assembled out of the box, the o-rings are already lubricated for your first use. To disassemble, the collar that holds the plunger will need to be pulled off. It is a pressure fit, not threaded, and the easiest way to remove it will be to simply pull the plunger back against it. You may need to repeat that a few times for it to pop out.
Answered by: Wagner
Date published: 2015-10-21

Leaking from the cap P#0514118

when i used my paintmate plus the paint is leaking from behind the white cap, the seal part number 0514112 is installed correctly, what is the issue?
Asked by: davef
The seal may need to be lubricated with some petroleum jelly or may need to be replaced. You can order those from us by calling (800)328-8251.
Answered by: Wagner
Date published: 2015-03-09

Can the Paint-N-Roll be used to stain a deck and if so does it need a special roller replacement

Looking to stain with the semi transparent redwood stain
Asked by: SanderZ
You certainly could apply stain to a deck using a Paint-N-Roll, however in order to get into the cracks and crevasses of the boards, as well as in between the boards a product like our DeckMate is better suited.
Answered by: Wagner
Date published: 2014-08-25

Can you use any standard roller covers?

I see the inside of the cover has a bunch of holes in it and I'm wondering if I have to buy new ones from Wagner.
Asked by: Rollo
The roller cover needs to be a 9" perforated roller. You can call us directly at 1-800-760-3844 to place an order for replacement covers.
Answered by: Wagner
Date published: 2013-10-22

Can i buy a lid with a suction tube designed to fit a five gallon bucket?

My unit came with a "rubberized" lid and fill tube to fit a 1 gallon paint can. It worked very well. I usually paint out of a five gallon bucket. Do you have a lid and fill tube that will fit that??
Asked by: DPIDLI
We do not have a lid for a 5 gallon bucket, however we do have a 5 gallon adapter that will allow you to draw paint directly from a 5 gallon container. The pn# is 0284051B and can be ordered by calling Wagner directly at 1-800-760-3844.
Answered by: Wagner
Date published: 2013-10-22
  • y_2018, m_11, d_13, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_024964158973, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_wagnerspraytech
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 210.07ms